-
深圳市盈顺福润滑油有限公司
主营：液压油,齿轮油,透平油,机械导轨油,冷冻机油,高温润滑脂
深圳市盈顺福润滑油有限公司
主营：液压油,齿轮油,透平油,机械导轨油,冷冻机油,高温润滑脂
9
Mobil? DTE 932 GT is a next generation high performance turbine oil designed for use in large frame turbines under severe operating conditions. This product is based on selected high quality base oils carefully balanced with a proprietary additive system to provide long oil life in combination with industry leading “keep clean” performance. The formulations also include a non-zinc antiwear system to meet the load carrying requirements of geared turbines.
Mobil DTE 932 GT meets the requirements of modern combustion turbines where the oil is used both as a turbine bearing lubricant as well as for hydraulic controls. Mobil DTE 932 GT is specifically formulated for General Electric Frame 3, 5, 6, 7 and 9 turbines with common bearing and hydraulic oil reservoir, where varnish control is most needed.
The carefully balanced combination of base oils and additives is designed to limit the occurrence of varnish formation in the hydraulic system of these turbines. The keep clean performance in combination with a high level of oxidation and thermal stability help provide long and reliable turbine performance.
Mobil DTE brand mineral-based products have been the choice for turbine operators worldwide for more than one hundred years. During that period our company's scientists have maintained the strongest ties with turbine equipment builders and operators to ensure that the needs of new turbine designs are met or exceeded by our lubricants. This has required a continual upgrading of Mobil branded turbine oils and the application of the most appropriate modern base oil and additive technology
For modern stationary gas turbines operating at high power outputs, exceptional protection against thermal/oxidative degradation and deposit control are key requirements. Severe operation causes thermal stressing of the lubricant that can result in filter plugging, servo valve deposits or short oil life.
Mobil DTE 932 GT oil offers the following features and potential benefits:
| Features | Advantages and Potential Benefits |
|---|---|
| Excellent thermal/oxidation stability | Helps reduce downtime leading to more reliable operation |
| Helps extend oil charge life enabling lower product costs | |
| Reduces varnish formation potential | Reliable turbine operation and helps reduce maintenance of hydraulic system components |
| Excellent foam control and air release | Quick start up potential, even at lower ambient temperatures |
| Good electrical conductivity | Helps reduce varnish formation potential leading to reliable turbine operation and helps reduce maintenance of hydraulic system components |
Mobil DTE 932 GT is a high performance turbine oil designed for use in gas turbine oil systems, direct- or gear-coupled, and turbine speed control mechanisms. Specific applications include:
Application Note: Mobil DTE 932 GT is not compatible with Mobil DTE 732. Drain and flush is required when converting.
| Mobil DTE 932 GT meets or exceeds the requirements of: | 932 GT |
|---|---|
| GE GEK 32568G | X |
| Mobil DTE 932 GT is recommended by ExxonMobil for use in Applications requiring: | 932 GT |
|---|---|
| GE GEK 101941A | X |
| GE GEK 28143 B | X |
| Mobil DTE 932 GT | |
|---|---|
| ISO Viscosity Grade | 32 |
| Viscosity, ASTM D 445 | |
| cSt @ 40o C | 31.5 |
| cSt @ 100o C | 6.1 |
| Viscosity Index, ASTM D 2270 | 141 |
| Pour Point, oC, ASTM D 97 | -18 |
| Flash Point, oC, ASTM D 92 | 240 |
| Specific Gravity 15.6o C/15.6o C,ASTM D 4052 | 0.84 |
| TOST, ASTM D 943, Hours to 2 NN | 9000+ |
| RPVOT, ASTM D 2272, min. | 900 |
| FZG Scuffing, DIN 51354, A/8.3/90, Fail Stage | 10 |
| Rust Prevention, ASTM D 665 | |
| Distilled Water | Pass |
| Sea Water | Pass |
| Copper Strip Corrosion, ASTM D 130,3 hrs @ 100o C | 1B |
| Foam Test, ASTM D 892 | |
| Sequence I, tendency/stability, ml/ml | 20/0 |
| Sequence II, tendency/stability, ml/ml | 15/0 |
| Sequence III, tendency/stability, ml/ml | 20/0 |
| Air Release, ASTM D 3427, mins | 2 |
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
All products may not be available locally.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise..
10-2012
Copyright ? 2001-2013 Exxon Mobil Corporation. All rights reserved..